Sawstop Q&A from their support - Woodworking Talk
2010年12月8日 · Yes, all current SawStop models use the same brake cartridge. Q. In the off chance that the Sawstop company went out of business would there be some 3'ed party company who would make the break cartridges for these saws in the future? A. SawStop as a company is doing very well and has over 22,000 table saws in the field. SawStop is also the ...
Can I use this dado with a SawStop? - Woodworking Talk
2021年11月20日 · Say there's a brake trigger event with a SawStop approved blade and you just get a little mark on your finger that doesn't even bleed. Same thing but with a comparable blade that is anti-kickback and you need 3 stitches, but no permanent injury. But with the anti-kickback blade there's less chance of a cracked rib, or face injury etc.
Saw Stop question - Woodworking Talk
2020年4月20日 · You can put a SawStop into bypass mode before making a cut that might trigger the SawStop. Bypass mode disables the safety brake mechanism. If you make a test cut of the material while the SawStop is in bypass mode, the SawStop will indicate whether the safety mechanism would have triggered during the test cut.
New safety dado set allowed in EU | Woodworking Talk
2024年2月5日 · The Katz-Moses demo shows a SawStop brake triggering with the new CMT dado stack, and yes, the teeth stay in their positions. The issue with the depth limiting shoulders on blades is that they slow down the time it takes for the SawStop brake system to complete its activate-and-brake cycle, thus resulting in more severe injuries.
Sawstop vs. Bosch ReaXX - Woodworking Talk
2019年2月8日 · SawStop offer only one firing per brake. The cost of a two-firing REAXX cartridge and a single SawStop brake are comparable. * BLADE REUSE AFTER TRIGGERING: When a Bosch REAXX triggers, the blade drops below the table and is undamaged. When a SawStop triggers, it drives an aluminum brake into the blade.
Modified Sawstop - Woodworking Talk
2023年10月9日 · Better yet, sawstop should be in permanent bypass, with a button to push with a sign above it that says "if your terrified of operating this saw or all thumbs with power tools PUSH THIS BUTTON!". 😂 That said, it's probably an hour job to rewire the sawstop to work properly, just add the cost of new brake and blade to your saw cost.
sawstop users - Woodworking Talk
2021年10月1日 · SawStop saws have a bypass mode that lets you disable the safety mechanism to cut questionable material that may be conductive and trigger the saw. One of the features of Bypass Mode is that when you turn off the saw after finishing a cut, the indicator will show whether the SawStop brake would have triggered if Bypass Mode were not enabled.
SawStop aftermath - Woodworking Talk
2013年4月16日 · In this case the blade was not spun and re-inserted into the mechanism for effect. It was apparent that the section of the blade stuck in the brake is in there from when the brake triggered. The aluminum is seized up around the blade and the deformations are correct for having occurred when the blade was in full rotation.
SawStop PCS175-TGP236 - Woodworking Talk
2023年11月14日 · For SawStop-specific inspection, there isn't much to say. Make sure the saw runs in both regular mode and bypass mode. Ask the seller if they are including a dado brake and/or a spare standard brake with the saw. (Note: Used safely and correctly, you should never expect to trigger a SawStop saw.
Bandsaw Choice | Page 2 | Woodworking Talk
2011年11月27日 · The SawStop tech does dramatically reduce the cutting injury risk. But the other big TS risk is kickback, and for that SawStop is the same as any other modern quality saw. My Bengal's name is Pogo because she is spring loaded.